10″ Walk Behind Scarifier Drum Assemblies for Cutters
- With cutter accessories create a wide range of surface profiles
- Remove concrete, paint, corrosion and more
10″ Wide Double-Enforced Drum Assembly
- Double-Enforced Drum, (6) 5/8″ Shafts
10″ Wide Re-enforced Grooving Drum Assembly
- Re-enforced Grooving Drum, (6) 5/8″ Shafts
10″ Wide Double-Enforced Drum Assembly with TCT Cutters
- Double-Enforced Drum, (6) 5/8″ Shafts, 123 TCT Cutters & 129 Spacers
10″ Wide Re-Enforced Drum Assembly with TCT Cutters
- 4x Enforced Grooving Drum, (6) 5/8″ Shafts, 36 TCT Cutters & 224 Spacers
10″ Wide Double-Enforced Drum Assembly with Star Cutters
- Double-Enforced Drum, (6) 5/8″ Shafts, 342 Star Cutters
10″ Wide Double-Enforced Drum Assembly with Beam Cutters
- Double-Enforced Drum, (6) 5/8″ Shafts, 332 Beam Cutters
10″ Wide Double-Enforced Drum Assembly with Milling Cutters
- Double-Enforced Drum, (6) 5/8″ Shafts, 60 Milling Cutters
Benefits
- Quick‑mount side access drum system design allows operators to change drums in minutes, reducing downtime and increasing daily output. Reduces the risk of hand and impact injuries.
- Pre-mounted assemblies available with drums that arrive ready to install, allowing crews to get to work immediately.
- Engineered drum balance minimizes vibration and ensures consistent, even cutting across the full 10" width for superior surface uniformity.
- Built with up to 5/8" thick cutting shafts to withstand aggressive removal applications and extend service life.
- Achieves up to 1/4" removal per pass depending on cutter selection, ideal for high production surface prep.
- Precision machined drum housings maintain cutter alignment for cleaner cuts, reduced chatter, and longer cutter life.
- Works with a full range of carbide, steel, and specialty cutters designed for extended wear and reduced downtime.
Applications & Usage
- 10″ Walk Behind Scarifier Drum Assemblies for Cutters designed for aggressive concrete surface removal. Efficiently strip coatings, epoxies, paint, traffic lines, thermoplastics, and adhesives to prepare substrates for new flooring systems or overlays.
- Ideal for leveling uneven concrete, asphalt, and stone surfaces, allowing operators to reduce sidewalk trip hazards, eliminate high spots, and correct surface imperfections with controlled, uniform material removal.
- Used to create a wide range of Concrete Surface Profiles (CSP 1–10) by pairing the drum with the appropriate cutter style. Enables proper mechanical bonding for coatings, waterproofing systems, and resurfacing materials.
- Well suited for preparing steel and metal surfaces, removing rust, scale, corrosion, and old coatings. Commonly used on ship decks, tanks, bridges, and industrial platforms where mechanical surface conditioning is needed.
- 10″ Walk Behind Scarifier Drum Assemblies for Cutters useful for adhesive and mastic removal. This includes carpet glue, tile mastics, and flooring adhesives, enabling clean substrate preparation for reinstallation or refinishing.
Technical Specifications
| Part Number | Description | For Model | IMPA | ISSA | Applications | Included Components |
|---|---|---|---|---|---|---|
| 326.06DW | 10" Wide Double-Enforced Drum Assembly | TFP 260 | N/A | N/A | With cutter accessories create a wide range of surface profiles. Remove concrete, paint, corrosion and more. | Double-Enforced Drum, (6) 5/8" Shafts |
| 326.060G | 10" Wide Re-enforced Grooving Drum Assembly | TFP 260 | N/A | N/A | With TCT cutters create grooved profiles in concrete for non-slip surfacing and drainage channels. | Re-enforced Grooving Drum, (6) 5/8" Shafts |
| 326.1016ST | 10" Wide Double-Enforced Drum Assembly with TCT Cutters | TFP 260 | N/A | N/A | For creating a heavy surface profiles CSP ratings 6-9. Reduce, remove, and roughen concrete, coatings, corrosion and more. | Double-Enforced Drum, (6) 5/8" Shafts, 123 TCT Cutters & 129 Spacers |
| 326.1016GT | 10" Wide Re-Enforced Drum Assembly with TCT Cutters | TFP 260 | N/A | N/A | For creating grooved profiles in concrete for non-slip surfacing and drainage channels. | 4x Enforced Grooving Drum, (6) 5/8" Shafts, 36 TCT Cutters & 224 Spacers |
| 326.1016DS | 10" Wide Double-Enforced Drum Assembly with Star Cutters | TFP 260 | N/A | N/A | For creating medium surface profiles CSP ratings 4-5. Reduce, remove, and roughen concrete, coatings, corrosion and more. | Double-Enforced Drum, (6) 5/8" Shafts, 342 Star Cutters |
| 326.1016DS | 10" Wide Double-Enforced Drum Assembly with Beam Cutters | TFP 260 | N/A | N/A | For creating a light surface profile CSP ratings 3-4. Reduce, remove, and roughen concrete, coatings, corrosion and more | Double-Enforced Drum, (6) 5/8" Shafts, 332 Beam Cutters |
| 326.1016DM | 10" Wide Double-Enforced Drum Assembly with Milling Cutters | TFP 260 | N/A | N/A | For removing thick and soft materials such as thermoplastics, mastic, waterproofing membranes, glues, plastics and similar. Leaves a light surface profile CSP ratings 3-4. | Double-Enforced Drum, (6) 5/8" Shafts, 60 Milling Cutters |
| 326.0016 | (6) 10" Wide Cutter Industrial Shafts | TFP 260 | N/A | N/A | Shafts for Drums | (6) 5/8" Shafts |
Related PDFs
Catalog PDF 1
CAT_Floor_Scarifiers
Download PDF
Catalog PDF 2
CAT_Metalworking_2024
Download PDF
Catalog PDF 3
CAT_Contractor_Tools_2022
Download PDF
Usage
- 10″ Walk Behind Scarifier Drum Assemblies for Cutters designed for aggressive concrete surface removal. Efficiently strip coatings, epoxies, paint, traffic lines, thermoplastics, and adhesives to prepare substrates for new flooring systems or overlays.
- Ideal for leveling uneven concrete, asphalt, and stone surfaces, allowing operators to reduce sidewalk trip hazards, eliminate high spots, and correct surface imperfections with controlled, uniform material removal.
- Used to create a wide range of Concrete Surface Profiles (CSP 1–10) by pairing the drum with the appropriate cutter style. Enables proper mechanical bonding for coatings, waterproofing systems, and resurfacing materials.
- Well suited for preparing steel and metal surfaces, removing rust, scale, corrosion, and old coatings. Commonly used on ship decks, tanks, bridges, and industrial platforms where mechanical surface conditioning is needed.
- 10″ Walk Behind Scarifier Drum Assemblies for Cutters useful for adhesive and mastic removal. This includes carpet glue, tile mastics, and flooring adhesives, enabling clean substrate preparation for reinstallation or refinishing.
Benefits
- Quick‑mount side access drum system design allows operators to change drums in minutes, reducing downtime and increasing daily output. Reduces the risk of hand and impact injuries.
- Pre-mounted assemblies available with drums that arrive ready to install, allowing crews to get to work immediately.
- Engineered drum balance minimizes vibration and ensures consistent, even cutting across the full 10" width for superior surface uniformity.
- Built with up to 5/8" thick cutting shafts to withstand aggressive removal applications and extend service life.
- Achieves up to 1/4" removal per pass depending on cutter selection, ideal for high production surface prep.
- Precision machined drum housings maintain cutter alignment for cleaner cuts, reduced chatter, and longer cutter life.
- Works with a full range of carbide, steel, and specialty cutters designed for extended wear and reduced downtime.
Usage
- 10″ Walk Behind Scarifier Drum Assemblies for Cutters designed for aggressive concrete surface removal. Efficiently strip coatings, epoxies, paint, traffic lines, thermoplastics, and adhesives to prepare substrates for new flooring systems or overlays.
- Ideal for leveling uneven concrete, asphalt, and stone surfaces, allowing operators to reduce sidewalk trip hazards, eliminate high spots, and correct surface imperfections with controlled, uniform material removal.
- Used to create a wide range of Concrete Surface Profiles (CSP 1–10) by pairing the drum with the appropriate cutter style. Enables proper mechanical bonding for coatings, waterproofing systems, and resurfacing materials.
- Well suited for preparing steel and metal surfaces, removing rust, scale, corrosion, and old coatings. Commonly used on ship decks, tanks, bridges, and industrial platforms where mechanical surface conditioning is needed.
- 10″ Walk Behind Scarifier Drum Assemblies for Cutters useful for adhesive and mastic removal. This includes carpet glue, tile mastics, and flooring adhesives, enabling clean substrate preparation for reinstallation or refinishing.
Benefits
- Quick‑mount side access drum system design allows operators to change drums in minutes, reducing downtime and increasing daily output. Reduces the risk of hand and impact injuries.
- Pre-mounted assemblies available with drums that arrive ready to install, allowing crews to get to work immediately.
- Engineered drum balance minimizes vibration and ensures consistent, even cutting across the full 10" width for superior surface uniformity.
- Built with up to 5/8" thick cutting shafts to withstand aggressive removal applications and extend service life.
- Achieves up to 1/4" removal per pass depending on cutter selection, ideal for high production surface prep.
- Precision machined drum housings maintain cutter alignment for cleaner cuts, reduced chatter, and longer cutter life.
- Works with a full range of carbide, steel, and specialty cutters designed for extended wear and reduced downtime.
Empty tab. Edit page to add content here.
Empty tab. Edit page to add content here.
