Urgent Weekend/Holiday Fulfillment Available - Click For Details 
Pneumatic Corner Drills and Bridge Reamers
High-torque drilling, reaming and driving units
Corner Drills and Bridge Reamers
- Small side-to-side distance for working in tight spaces
- Self-closing roll throttle
- Built-in oiler for motor
- Ideal for bridge reaming and drilling applications
- Non-Reversible
- Reversible
| Model No. | Morse Taper | Drilling (in steel) | Reaming (in steel) | Torque Output (ft./lbs.) | Load Speed (RPM) | Motor Power (HP) | CFM at 90 PSI | Length | Weight (lbs.) |
|---|---|---|---|---|---|---|---|---|---|
| 2 1602 0030 | #1 | 5/8" | 1/2" | 7 | 500 | 0.7 | 21 | 12.5" | 7 |
| 2 1701 0030 | #2 | 7/8" | 5/8" | 35 | 270 | 1.8 | 49 | 20.9" | 19 |
| 2 1801 0030 | #3 | 1-1/4" | 1" | 53 | 260 | 2.6 | 63 | 22.5 | 25 |
- Model No. 2 1602 0030 has a 3/8" NPT air inlet. A 1/2" (13mm) hose is recommended.
- Model No. 2 1701 0030 has a 3/4" NPT air inlet. A 1/2" (13mm) hose is recommended.
- Model No. 2 1801 0030 has a 3/4" NPT air inlet. A 5/8" (15mm) hose is recommended.
| Model No. | Morse Taper | Drilling (in steel) | Reaming (in steel) | Tube Rolling Cap. | Torque Output (ft./lbs.) | Load Speed (RPM) | Motor Power (HP) | CFM at 90 PSI | Length | Weight (lbs.) |
|---|---|---|---|---|---|---|---|---|---|---|
| 2 2104 0030 | #4 | 2-1/8" | 2" | 2" | 86 | 180 | 3.0 | 71 | 23.8" | 37 |
A 5/8" (15mm) hose is recommended for model 2 2104 0030.
| SHORTCUTS: | DOWNLOADS: |
|---|---|
Visit us at these Upcoming Trade Shows, Click to See our Booth Location:
