Extensions for Annular Cutters
For use with magnetic drills - adapters for weldon shank and jacob's chucks
Extra-long holders extend stroke of drills
- Extend cutter reach up to 18"
- For magnetic drills with 3/4" or 1-1/4" arbor bore or MT2, MT3, MT4
- Also available with 3 flats for straight shank drill chucks and R8 shanks for drill presses
- Drill difficult-to-reach areas
- Extend cutter reach over the side or through an existing hole*
For assistance in selecting the right extension for your drill application, call 1-800-700-5919 or 203-853-9522.
- Weldon Extensions
- 3-Flats x 3/4" Arbor
- R8 Connection
Part No. | Size | |
---|---|---|
7-9-902 | 2" extension | |
7-9-903 | 3" extension | |
7-9-904 | 4" extension | |
7-9-906 | 6" extension | |
7-9-912 | 12" extension | |
7-9-918 | 18" extension | |
7-9-1146 | 6" extension, 1-1/4" male x 1-1/4" female shank |
* Hole diameter must be larger than 1-5/16" to accommodate width of extension.
Part No. | Size | |
---|---|---|
3 Flats for Geared Chucks x 3/4" arbor | 7-9-100 | 2-1/8" length, 1/2" shank |
7-9-200 | 2" length, 3/4" shank |
Part No. | Size | |
---|---|---|
R8 | 7-9-500 | R8, 1-3/4" length; 3/4" arbor bore |
7-9-506 | R8, 6" length; 3/4" arbor bore | |
7-9-70C | R8, 2-3/4" length; 1-1/4" arbor bore |
SHORTCUTS: | DOWNLOADS: |
---|---|