PTX Eco Smart Linear Grinding System
Learn how to obtain, maintain and protect finished or polished stainless steel surfaces with the PTX Eco Smart linear grinding system
The newly developed grinding and polishing system, featuring special “TZ” Pyramid and SuperPolish fabrics from CS Unitec, produces a perfect mirror finish quickly and in just a few steps. Tip: When grinding with “TZ” Pyramid abrasives, you must also move longitudinal and diagonally to the working direction to ensure that the material is removed evenly. Important: After each step, remove the compound residue from the workpiece with PTX Brightex® Softclean Powder and a microfiber cloth. The result... a brilliant mirror finish!Tip: With the pre-polishing compound you should also work longitudinal and diagonally to the working direction. This is not necessary for working with the finish compound and polishing cream. |
Compound residues, fingerprints, dust, minor oil and grease marks and adhesive residue can be removed effortlessly with Brilliance-Clean. Any residue will evaporate immediately. To protect finished or polished metal surfaces, spray INOX-Protect on the surface, rub off with a microfiber cloth, wipe the surface dry and then polish briefly. The surface will be protected by a dry, invisible film for several weeks. Polished finishes will not be darkened by this product. Click here for more information about these products. |
Closed belts such as the high-quality aluminum oxide belt or the “TZ” Pyramid belt must be cut open to work on closed pipe constructions. Place the belt over the pipe and join using our special adhesive tape (P/N 49000) over the entire length (approx. 370°). |