Deep Sockets, 6-Point, 1/2" Drive

Ex1630 Series

  • Ex1630 Deep Impact Sockets, 6-Point, 1/2" Drive
  • Ex1630 Deep Impact Sockets, 6-Point, 1/2" Drive Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex1630 Deep Impact Sockets, 6-Point, 1/2" Drive
  • Ex1630 Deep Impact Sockets, 6-Point, 1/2" Drive Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2015 certified production, TUV materials certified
  • Lifetime Warranty

Applications:

  • Non-sparking deep sockets for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic deep sockets for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant deep sockets for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Standard Sizes
  • Metric Sizes
  • Alloys & Use
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex1630-005UAEx1630-005UB

 


No.
a
inch
s
inch
Bolt Clearance Depth
Inch
Hex Depth
Inch
Ex1630-005U1/21/42.670.98
Ex1630-010U1/25/162.670.98
Ex1630-015U1/23/82.670.98
Ex1630-020U1/27/162.670.98
Ex1630-025U1/21/22.670.98
Ex1630-030U1/29/162.670.98
Ex1630-032U1/219/322.670.98
Ex1630-035U1/25/82.670.98
Ex1630-040U1/211/162.670.98
Ex1630-045U1/23/42.670.98
Ex1630-047U1/225/322.670.98
Ex1630-050U1/213/162.670.98
Ex1630-055U1/27/82.670.98
Ex1630-060U1/215/162.670.98
Ex1630-065U1/212.670.98
Ex1630-070U1/21-1/162.670.98
Ex1630-075U1/21-1/82.670.98
Ex1630-080U1/21-3/162.670.98
Ex1630-085U1/21-1/42.670.98
Ex1630-090U1/21-5/162.670.98
Ex1630-095U1/21-3/82.670.98
Ex1630-100U1/21-7/162.670.98
Ex1630-110U1/21-1/22.670.98
Ex1630-115U1/21-9/162.670.98
Ex1630-120U1/21-5/82.670.98
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex1630-6AEx1630-6B

 


No.
a
inch
s
mm
Bolt Clearance Depth
mm
Hex Depth
mm
Ex1630-61/266825
Ex1630-71/276825
Ex1630-81/286825
Ex1630-91/296825
Ex1630-101/2106825
Ex1630-111/2116825
Ex1630-121/2126825
Ex1630-131/2136825
Ex1630-141/2146825
Ex1630-151/2156825
Ex1630-161/2166825
Ex1630-171/2176825
Ex1630-181/2186825
Ex1630-191/2196825
Ex1630-201/2206828
Ex1630-211/2216828
Ex1630-221/2226828
Ex1630-231/2236828
Ex1630-241/2246828
Ex1630-251/2256828
Ex1630-261/2266828
Ex1630-271/2276828
Ex1630-281/2286828
Ex1630-291/2296828
Ex1630-301/2306828
Ex1630-321/2326828
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance
Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance
 
Use Guidelines
Proper UseMisuse
Ball peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal.
When striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3/8" larger than the struck face of the tool.
Never use a pipe extension or other form
of "cheater" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut.
If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness.
Hand Sockets should never be used on power drive or impact wrenches.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Downloads: