Pipe Cutter

Ex1512 Series

  • Ex1512 HD Non-Sparking, Non-Magnetic Pipe Cutter
  • Ex1512 HD Non-Sparking, Non-Magnetic Pipe Cutter Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex1512 HD Non-Sparking, Non-Magnetic Pipe Cutter
  • Ex1512 HD Non-Sparking, Non-Magnetic Pipe Cutter Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2015 certified production, TUV materials certified
  • Lifetime Warranty
Applications:
  • Non-sparking pipe cutter for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic pipe cutter for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant pipe cutter for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Standard Sizes
  • ALLOYS & USE
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex1512-60AEx1512-60B
No.
a
inch
d max
inch
l
inch
Wt.
lbs.
a
mm
d max
mm
l
mm
Wt.
kg
Ex1512-603-11/162-3/817-3/47.2192604453.27
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance
Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance

For More Information on Choosing The Correct Alloy for Your Application - Click Here
 
Use Guidelines
Proper UseMisuse
Pipe cutter wheels that are nicked or otherwise damaged should be replaced.
When removing, rapid spinning of the die threading stock is not recommended as this may damage the tool.
Be certain the cutting wheel is suitable to cut type of pipe material. Thin wheel is suitable for cutting ordinary steel pipe, stout wheel is made to cut cast iron.
Other wheels are available for stainless steel, plastic and other materials.
If there is not enough space to swing the single wheel pipe cutter completely around pipe, then a three or four-wheel cutter should be used.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Downloads: