Air Circular Saws
- Cutting Capacity: Up to 4-3/4″
- Speed: Up to 3200 RPM
- Motor Power: Up to 2.4 HP
- 7″ Saw includes rip fence and blade wrench (blade not included)
- 9″ Saw includes an impact-resistant carrying case and Ultra-thin LBS blade (P/N 722-23060)
- 12-5/8″ Saw includes a saw blade (Part No. 608276)
Benefits
- High‑torque pneumatic motors deliver consistent cutting power through steel, stainless steel, aluminum, composites, and other industrial materials, eliminating burn out from stalls.
- 7-1/2" & 12-5/8" saws include D-handle design with inside trigger and safety lock button to prevent accidental starting.
- 9" saw is ATEX Certified. Spark free, air powered operation makes these saws ideal for hazardous, explosive risk, or ignition sensitive environments where electric tools cannot be used.
- No coolant dry cutting reduces cleanup, eliminates fluid handling, and improves jobsite efficiency.
- 12-5/8" saw includes suction nozzle and internal chip collector for clean operation.
- Lightweight, ergonomic designs improve maneuverability and reduce operator fatigue during extended cutting tasks.
- Available in multiple blade diameters to match cutting depth and material requirements across a wide range of applications.
- Fast, clean cuts with minimal burrs, reducing or eliminating secondary finishing..
Applications & Usage
- Air Circular Saws for cutting steel plate, angle iron, channels, rebar, and structural profiles.
- Ideal for metal framing, decking, and onsite fabrication.
- Cutting metal components during shutdowns, retrofits, and maintenance.
- Safe for refineries, chemical plants, and other spark restricted environments.
- Cutting pipe, conduit, and metal infrastructure during installation or repair.
- Effective in trenches, vaults, and confined spaces where electric tools are unsafe.
- Reliable in wet, corrosive, or salt exposed environments.
- Used for cutting steel plate, ship components, and structural materials.
Technical Specifications
| 7-1/2" dia. Air Circular Saw | |
| Part No. | 5 1116 0020 |
|---|---|
| Motor Power | 1.7 HP (1.3 kW) |
| Blade Diameter* | 7-1/2" (190mm) |
| Max. Depth of Cut | 2-1/2" at 90° 1-1/2" at 45° |
| Speed (Free) | 3,200 RPM |
| Air Consumption | 53 CFM at 90 PSI |
| Air Connection | 1/2" NPT |
| Vibration | <2.5 m/s2 |
| Length | 13-1/2" |
| Weight | 19 lbs. |
| * The Model 5 1116 0020 saw also accepts 7-1/4" dia. blades. | |
| 9" Dia. Air Circular Saw | |
| Part No. | 5 1115 0020 N |
|---|---|
| Motor Power | 2 HP (1.5 kW) |
| Blade Diameter | 9" |
| Max. Depth of Cut | 3-1/4" at 90° 2-1/8" at 45° |
| Speed (Free) | 1,700 RPM |
| Air Consumption | 71 CFM at 90 PSI |
| Air Connection | 1/2" NPT |
| Vibration | <2.5 m/s2 |
| Weight | 19 lbs. |
| 12-5/8" Dry Cutting Air Circular Saw | |
| Part No. | 5 1117 0020 N |
|---|---|
| Motor Power | 2.4 HP (1.8 kW) |
| Blade Diameter | 12-5/8" |
| Max. Depth of Cut | 4-3/4" |
| Speed (Free) | 1,200 RPM |
| Air Consumption | 71 CFM at 90 PSI |
| Air Connection | 1/2" NPT |
| Vibration | <2.5 m/s2 |
| Weight | 24 lbs. |
| Optional 12-5/8" Saw Blade for Model 8320 SHDC P/N 608276SI, 84T, for stainless steel. Blade specially coated, increasing cutting life by 2.5X | |
Optional Accessories
OptionalOptional
OptionalRelated PDFs
Catalog PDF 1
CAT_Circular_Saws
Download PDF
Catalog PDF 2
CAT_Saws
Download PDF
Catalog PDF 3
CAT_Metalworking_2024
Download PDF
Product Schematic 1
SCHEM_511160010
Download PDF
Product Schematic 2
SCHEM_511170020
Download PDF
Operating Manual
MANUAL_511150010
Download PDF
Usage
- Air Circular Saws for cutting steel plate, angle iron, channels, rebar, and structural profiles.
- Ideal for metal framing, decking, and onsite fabrication.
- Cutting metal components during shutdowns, retrofits, and maintenance.
- Safe for refineries, chemical plants, and other spark restricted environments.
- Cutting pipe, conduit, and metal infrastructure during installation or repair.
- Effective in trenches, vaults, and confined spaces where electric tools are unsafe.
- Reliable in wet, corrosive, or salt exposed environments.
- Used for cutting steel plate, ship components, and structural materials.
Benefits
- High‑torque pneumatic motors deliver consistent cutting power through steel, stainless steel, aluminum, composites, and other industrial materials, eliminating burn out from stalls.
- 7-1/2" & 12-5/8" saws include D-handle design with inside trigger and safety lock button to prevent accidental starting.
- 9" saw is ATEX Certified. Spark free, air powered operation makes these saws ideal for hazardous, explosive risk, or ignition sensitive environments where electric tools cannot be used.
- No coolant dry cutting reduces cleanup, eliminates fluid handling, and improves jobsite efficiency.
- 12-5/8" saw includes suction nozzle and internal chip collector for clean operation.
- Lightweight, ergonomic designs improve maneuverability and reduce operator fatigue during extended cutting tasks.
- Available in multiple blade diameters to match cutting depth and material requirements across a wide range of applications.
- Fast, clean cuts with minimal burrs, reducing or eliminating secondary finishing..
Usage
- Air Circular Saws for cutting steel plate, angle iron, channels, rebar, and structural profiles.
- Ideal for metal framing, decking, and onsite fabrication.
- Cutting metal components during shutdowns, retrofits, and maintenance.
- Safe for refineries, chemical plants, and other spark restricted environments.
- Cutting pipe, conduit, and metal infrastructure during installation or repair.
- Effective in trenches, vaults, and confined spaces where electric tools are unsafe.
- Reliable in wet, corrosive, or salt exposed environments.
- Used for cutting steel plate, ship components, and structural materials.
Benefits
- High‑torque pneumatic motors deliver consistent cutting power through steel, stainless steel, aluminum, composites, and other industrial materials, eliminating burn out from stalls.
- 7-1/2" & 12-5/8" saws include D-handle design with inside trigger and safety lock button to prevent accidental starting.
- 9" saw is ATEX Certified. Spark free, air powered operation makes these saws ideal for hazardous, explosive risk, or ignition sensitive environments where electric tools cannot be used.
- No coolant dry cutting reduces cleanup, eliminates fluid handling, and improves jobsite efficiency.
- 12-5/8" saw includes suction nozzle and internal chip collector for clean operation.
- Lightweight, ergonomic designs improve maneuverability and reduce operator fatigue during extended cutting tasks.
- Available in multiple blade diameters to match cutting depth and material requirements across a wide range of applications.
- Fast, clean cuts with minimal burrs, reducing or eliminating secondary finishing..
Empty tab. Edit page to add content here.
Empty tab. Edit page to add content here.
