END 130/3.2 PO

The compact, robust 3-speed Diamond Core Drill for holes up to 6" dia.

Fast, efficient core drilling system ideal for narrow and difficult to access places

Holes up to 6" diameter mounted in a drill stand
Use hand-held up to 3-1/4" dia. and/or rig-mounted for up to 6" dia.
Mechanical Slip Clutch Design
Load Speeds: 600 / 1300 / 2800 RPM
15 Amps, 110V
Weight: 16 lbs.

Max. Hole Dia.	Speeds	Use	Weight	Power

Ø 6"	600 RPM 1300 RPM 2800 RPM	Hand-Held or Rig-Mounted	16 lbs.	15 Amp / 110 V

The best Diamond Core Drill in its class!

The Diamond Core Drill combines a robust all-aluminum housing with a compact size and powerful 15 AMP motor. The heavy-duty design and power reserve make it suitable for continuous use.

Use hand-held for up to 3-1/4" diameter and/or rig-mounted for up to 6" diameter. The mechanical 3-speed gearbox allows the operator to select the best speed for the core bit diameter. The result is optimum drilling and longer tool life.

All models include a built-in leveling bubble, safety slip clutch, carrying case, water swivel, overload signal and Ground Fault Interrupter. Connecting threads of 5/8" x 11 UNC, 1-1/4"x 7 UNC and G1/2" fit all standard core bits.

Optional accessories include anchor stand, (with or without vacuum pump), centering aid (part no. 35846), portable water tank, water collection ring kit, G 1/2" adapter and Unicore Diamond Core Bits. See Accessories for anchor stands, centering aid, portable water tank, and water collection kit.

Use:

Wet drilling in reinforced concrete, natural stone and asphalt especially for narrow, difficult accessible places, e.g. in pits
Aluminium housing suitable for civil engineering
Sanitary, heating and ventilation construction, civil engineering, landscape construction

Water Supply Control

5/8"x11 Part #: 258 992 1-1/4"x7 Part #: 258 991

Gardena Hose Connector

3-speed oil bath gearbox – optimal lubrication
Short, compact design for tight spaces
All-aluminium housing
Integrated level bubble on motor and handle for 90˚ drilling
Side handle with connection for centering device or water collection
Overload temperature control and GFCI overcurrent cut-off
Overload indicator light turns red when motor is overloaded - allows operator to reduce the feed pressure and protect the motor
Cut-off carbon brushes – protects the motor

Power input	15 Amp
Rated Voltage	110 V
Load Speeds (RPM)	600 / 1300 / 2800
No-Load Speeds	1000 / 2200 / 4300
Drilling Diameter	Gear 1 - 3-1/4"-6"* Gear 2 - 1-3/4"-3-1/4" Gear 3 - 1/2"-1-3/4" *with drill rig
Spindle Connection	1-1/4"x7 UNC 5/8"x11 UNC
Collar Diameter	60mm
Weight	16 lbs (motor only)
Supplied	In a molded carrying case with 5/8" and 1-1/4" adapters, water swivel, gardena hose connector and wrenches SW 32 + 41

Power input	15 Amp
Rated Voltage	110 V
Load Speeds (RPM)	600 / 1300 / 2800
No-Load Speeds	1000 / 2200 / 4300
Drilling Diameter	Gear 1 - 3-1/4"-6"* Gear 2 - 1-3/4"-3-1/4" Gear 3 - 1/2"-1-3/4" *with drill rig
Spindle Connection	1-1/4"x7 UNC 5/8"x11 UNC
Collar Diameter	60mm
Weight	37 lbs.
Supplied	END 130/3.2 PO with anchor stand BST 104/60 V and 60mm motor mount

Power input	15 Amp
Rated Voltage	110 V
Load Speeds (RPM)	600 / 1300 / 2800
No-Load Speeds	1000 / 2200 / 4300
Drilling Diameter	Gear 1 - 3-1/4"-6"* Gear 2 - 1-3/4"-3-1/4" Gear 3 - 1/2"-1-3/4" *with drill rig
Spindle Connection	1-1/4"x7 UNC 5/8"x11 UNC
Collar Diameter	60mm
Weight	45 lbs.
Supplied	END 130/3.2 PO with anchor stand BST 104/60 V, vacuum pump (P/N 253 511) and fittings

All Accessories

Shortcuts:	Downloads:
Diamond Core Drill Bits and Accessories Core DrillFinder ™ Dust Collection Systems	Catalog Pages: Diamond Core Drills and Stands (PDF) Product Bulletin: Core Drills (PDF) ESD 162 Dry Core Drilling Flyer (PDF) Schematics: END 130/3.2 PO (PDF) Schematics: END 130/3 P (PDF) Schematics: END 130/3 PO (PDF) Operating Manual: END 130/3 P (PDF)