END 712

Diamond wet "Mini Core" drill

  • END 712 P Wet Diamond Mini Core Drill
  • END 712 P Wet Diamond Mini Core Drill Side View
  • END 712 P Wet Diamond Mini Core Drill Application
  • END 712 P Wet Diamond Mini Core Drill
  • END 712 P Wet Diamond Mini Core Drill Side View
  • END 712 P Wet Diamond Mini Core Drill Application

Drills perfect holes up to 3/4" dia. in seconds! Ideal for tile, natural stone, porcelain, glass and concrete 

  • Dowel, anchor and thru holes up to 3/4" dia.
  • No shock or hammering - prevents cracking and spalding of material
  • Fast and precise holes, even in hard ceramic "gres" tiles and granite
  • Ideal for gravestones, countertops, plumbing and other masonry applications

Max. Hole
Dia.
Speeds
Use
Weight
Power
Diamond Core Drill Bit
Core Drill Gears
Core Drill Weight
Core Drill Power
Ø 3/4"
0-8000 RPM
Hand-Held
5 lbs.
6.3 Amp / 110 V

Mini Core Drill Starter Kit
*Quick bit connector not included

The fast mini core drill for holes up to 3/4" dia.

END 712 is a new high-speed diamond drill for dowel, anchor and thru holes in tile, natural stone and concrete. There is no shock or hammering. It drills precise holes, even in hard ceramic "gres" tiles and granite. Options include centering aid, water pressure tank and Unicore Diamond Core Bits.


Use:

  • Wet drilling in natural stone, tiles, ceramics, porcelain, stoneware, glass and concrete
  • Blind or thru holes for anchors, pipes, gravestones and countertops
  • Dowel holes
  • Tilers, stonemasons and installation companies


END 712 PC Mini Core Drill Starter Kit (shown right) includes drill, centering device with drilling template, water suction hose with Gardena-Connector, diamond wet full drill bits 1/4", 5/16", & 3/8" and sharpening block.
 

  • Features
  • Specifications
  • END 712 Accessory Bits
  • Video
  • Accessories
  • Electronic switch – stepless speed control
  • GFCI for overcurrent protection
  • Optimal concentricity
  • Integrated water supply
  • Easy to service – shaft seals are easily replaceable
  • Water supply control – on/off, stepless quantity control
  • Lightweight, ergonomic design – easy handling
  • Centering device (accessory)
Power input6.3 Amp
Rated Voltage110 V
Load Speed (RPM)0-8000
No-Load Speed11,000 RPM
Drilling Diameter5/32" to 3/4"
Spindle ConnectionM 12 x 1.5 male
Weight5 lbs
SuppliedIn a molded carrying case with depth gauge
END 712 Unicore Wet Diamond Bits
Part No.Drilling DiameterDrilling Depth
SKN-053/16"1.6"
SKN-061/4"2"
SKN-085/16"2"
SKN-103/8"2"
SKN-121/2"2"
SKS-155/8"2"
SKS-203/4"2"

Note: longer depth diamond bits available, special order
 


END 712 Quick Connect Diamond Bits (Discontinued)
Part No.Drilling DiameterDrilling Depth
FF-0408515/32"1.6"
FF-0509513/16"1.6"
FF-0659511/4"2"
FF-0809515/16"2"
FF-1010563/8"2.4"
FF-1213061/2"3.2"
FF-1613065/8"3.2"
FF-2013063/4"3.2"

 


SHORTCUTS:DOWNLOADS: