Construction
Construction
PRODUCT FILTER
Search :
Filter by tool type
Filter by Category
Air Power
- Cut steel pipe up to 30" I.D.
- Strokes per Minute: 100-350
- Stroke Length: 2-3/8"
- ATEX Certified on select models
- Connection: 3/4" NPT (ID)
- Motor Power: 1.5 HP
- Air Consumption: 51 CFM @ 90 PSI
- Accessory Clamps for Pipes and Profiles
Air Power
- Cutting Capacity: 6" Diameter in Steel, 8" Diameter in Plastic
- ATEX Certified for EX
- Strokes per Minute: 0-2300
- Stroke Length: 1-1/8"
- Connection: 1/2" NPT (ID)
- Motor Power: 1.7 HP
- Air Consumption: 51 CFM @ 90 PSI
Hydraulic Power
- Cutting Capacity: 6" Diameter in Steel, 8" Diameter in Wood
- Strokes per Minute: 1700
- Stroke Length: 1-1/8"
- Connection: Whip hoses & FF Couplings included
- Motor Power: 2 HP
- Oil Flow: 6 GPM flow (up to 13 GPM) @ 2000 PSI
Electric Power
- Cutting Capacity: 6" Diameter in Steel, 8" Diameter in Wood
- Strokes per Minute: 0-2200
- Stroke Length: 1-1/8"
- Motor Power: 12 Amp, 110 V (220 Available)
Hydraulic Power
- Cut up to 30" O.D. pipe
- Round Shaft for underwater tight seal
- Strokes per Minute: 100-500
- Stroke Length: 2-3/8"
- Oil Flow: 2.6-13.2 GPM @ 2000 PSI
- Motor Power: 3.8 HP
- Whip hoses & FF Couplings included
- Accessory clamps for pipe and profile
Electric Power
- Cut up to 30" I.D. Pipe
- Strokes per Minute: 200-400
- Stroke Length: 2-3/8"
- Motor Power: 1.5 HP, 11 Amp, 110 V
- Throttle: Trigger
- Accessory Clamps for Pipe and Profiles
Air Power
- Cutting Capacity: Up to 8" (Round), 9"x8-1/5" (Rectangular)
- Blade Speed: 2.2-5.75 ft/s (Variable and Single Speed options available)
- Connection: R 1/4" female and 1/2" NPT (ID)
- Motor Power: 0.7-1.3 HP
- Air Consumption: 19 CFM - 43 CFM
- ATEX Certified for EX Zones
Hydraulic Power
- Cutting Capacity: Up to 8" (Round), 9"x8-1/5" (Rectangular)
- Blade Speed: 4.2 ft/sec
- Connection: 1/2" FF (HTMA) COUPLINGS
- Motor Power: 1.6 HP
- Oil Flow: 4 GPM @ 2000 PSI
- Whip hoses & FF Couplings included
- ATEX Certified for EX Zones
Electric Power
- Cutting Capacity: Up to 8" (Round), 9"x8-1/5" (Rectangular)
- Blade Speed: 2.0-4.9 ft/s (Variable and 2 Speed options available)
- Motor Power: 6 Amp
Air Power
- Cutting Capacity: Up to 4-3/4"
- Speed: Up to 3200 RPM
- Motor Power: Up to 2.4 HP
Electric Power
- Cutting Capacity: 12-5/8" dia., 4-3/4" depth, 3/8" steel
- Speed: 1,700 RPM
- Motor Power: 16 Amp
Electric Power
- Max. Slot Width & Milling Depth: 2-2/5"
- Ideal for Concrete and Masonry slotting
- Load Speed: 2200 RPM
- Motor Power: 20 Amp
- Ideal for Masonry and Concrete
Electric Power
- Cutting Capacity: Up to 3"
- Speed: Up to 12,000 RPM (No Load)
- Motor Power: Up to 20 Amp
Electric Power
- Cutting Capacity: 1-3/8" Diameter
- Twist Drill Capacity: 1/2" Diameter
- Stroke: 2-3/4"
- Speed: 460 RPM
- Magnetic Force: 3080 lbs.
- Equipped with Electronic Safety Shutoff Sensor
Electric Power
- Cutting Capacity: 1-1/2" Diameter
- Stroke: 1-1/2"
- Compact Height: 7-1/8"
- Speed (RPM): 460
- Magnetic Force: 2640 lbs.
- LED light for increased visibility
- Uses standard 3/4" 2 flat shank annular cutters
- Equipped with Electronic Safety Shutoff Sensor
Electric Power
- Cutting Capacity: 2-1/16" Diameter
- Twist Drill Capacity: 7/8" Diameter
- Stroke: 6-1/3"
- Morse Taper: MT2
- Speeds (RPM): 250 | 450
- Magnetic Force: 3750 lbs.
- Keyless quick change chuck system
- Equipped with Electronic Safety Shutoff Sensor
- Optional swivel base model available:
- MAB 455 SB
Electric Power
- Cutting Capacity: 1-1/2" Diameter
- Twist Drill Capacity: 1/2" Diameter
- Stroke: 6"
- Magnetic Force: 3750 lbs.
- Automatic feed with auto stop and retraction
- Ideal for production: one user can operate multiple drills
- Maintain optimal RPM and feed rate/pressure for longer cutter life
Electric Power
- Cutting Capacity: 2" Diameter
- Twist Drill Capacity: 3/4" Diameter
- Stroke: 6"
- Morse Taper: MT2
- Magnetic Force: 3750 lbs.
- Automatic feed with auto stop and retraction
- Ideal for production: one user can operate multiple drills
- Maintain optimal RPM and feed rate/pressure for longer cutter life
- MT2 - 3/4" direct arbor with automatic cooling
Electric Power
- Cutter Capacity: 2-1/16" Diameter
- Twist Drill Capacity: 7/8" Diameter
- Stroke: 6-1/3"
- Morse Taper: MT2
- Reversible motor for tapping (15/16") and reaming (7/8")
- Speed Ranges (RPM): 50-250 | 100-450
- Magnetic Force: 3750 lbs.
- Quick-change keyless cutter system
- Equipped with Electronic Safety Shutoff Sensor
- Optional Swivel Base:
- MAB 485 SB
- New case study - Drilling titanium 747 wing beams with the MAB 485
Electric Power
- Cutter Capacity: 2-1/2" Diameter
- Twist Drill Capacity: 3/4" Diameter
- Stroke: 6-1/3"
- Morse Taper: MT3
- Magnetic Force: 4500 lbs.
- Reversible motor for tapping (15/16") and reaming (7/8")
- Speed Ranges (RPM): 70-280 | 180-580
- Quick-change keyless cutter system
- Equipped with Electronic Safety Shutoff Sensor
- Optional Swivel Base:
- MAB 525 SB
Electric Power
- Cutting Capacity: 4-1/16" Diameter
- Twist Drill Capacity: 1-1/4" Diameter
- Stroke: 10"
- Morse Taper: MT3
- Reversible motor for tapping (up to 1-3/16") and reaming (up to 1-1/4")
- Magnetic Force: 6600 lbs.
- 4 Variable Speed Motor
- Quick-change keyless cutter system
- Optional Automatic Hands-Free Drilling and/or Swivel Base
- Equipped with Electronic Safety Shutoff Sensor
[contact-form-7 id="154348" html_class="default-background" title="REQUEST A QUOTE"]
