Vibro-Lo™ 11-Head Pneumatic Floor Scabbler - 11-Head Concrete Floor Scabbler

Concrete keying and laitance removal - 11 heads provide 24,000 light blows per minute

  • 11-head air-powered concrete floor scabbler
  • 11-head air-powered concrete floor scabbler application
  • 11-head air-powered concrete floor scabbler application
  • 11-head air-powered concrete floor scabbling heads
  • 11-head air-powered concrete floor scabbler with integrated dust port
  • 11-head air-powered concrete floor scabbler
  • 11-head air-powered concrete floor scabbler application
  • 11-head air-powered concrete floor scabbler application
  • 11-head air-powered concrete floor scabbling heads
  • 11-head air-powered concrete floor scabbler with integrated dust port

Applications include:

  • Concrete keying
  • Laitance removal
  • Situations requiring gentle, effective scabbling without damaging the substrate below

Features:

  • Integrated Vibro-Lo™ vibration reduction technology for 8x less vibration than standard tool
  • 24,000 light blows per minute
  • Built-in dust shroud for dust and debris collection (model no. 159.6051)

Integrated Vibro-Lo™ vibration reduction technology

vibro-lo reduction technology
CS Unitec's Trelawny™ MHS11 Multi-Headed Concrete Floor Scabbler is a portable, compact, low-vibration machine that covers up to 325 sq. ft./hour.

CS Unitec's Trelawny™ MHS11 multi-headed concrete floor scabbler operates with 8x less vibration than standard models. This tool utilizes a 3-point mechanical vibration damping system to offset the hammer vibration created when the head impacts the workpiece.

Head Applications
Bush Hammer Heads are ideal for laitance removal; roughing concrete for resurfacing; bridge deck preparation for waterproofing.
Cruciform Cutter Heads are ideal for leveling floors, reducing concrete; removal of floor paints and coatings. Call for details on complete MHS 11 with Cruciform Heads.

  • Specifications
  • Accessories
  • Videos
MHS11 Low-Vibration Multi-Headed Concrete Floor Scabbler
Blows per minute – 24,200
Air flow – 55 CFM @ 90 PSI
Production rate – 325 sq. ft./hour
Cutter life – 32,000 sq. ft.
Noise level – 97 dB(a)
  
DescriptionModel
No.
Weight
(lbs.)
Dimensions
(WxLxH)
Cutting
Width
Vibration
Levels
m/s2
Vibro-Lo™
With Dust Shroud and Bush Hammer Heads159.605015511.25" x 13.5" x 50"10"4.96Yes
MHS11 Accessories
 Part No.
One-Piece Piston
TCT Bush Hammer Head
612.0125
Replaceable TCT
Bush Hammer Cutter Head
426.5355
Replaceable TCT
Cruciform Cutter Head
426.5358
Piston for Replaceable Cutter Heads612.0120
Whip Check815.5550
Lubricators859.1580

 

Shortcuts:Downloads: