8″ Walk Behind Scarifier Drum Assemblies for Cutters
- With cutter and brush accessories create a wide range of surface profiles
- Remove concrete, paint, corrosion and more
- With TCT cutters create grooved profiles in concrete for non-slip surfacing and drainage channels
8" Wide Drum Assembly
- Drum, (4) 1/2" Shafts
- Re-enforced Grooving Drum, (4) 1/2" Shafts
- Drum, (4) 1/2" Shafts, 80 TCT Cutters & 88 Spacers
- Re-Enforced Grooving Drum, (4) 1/2" Shafts, 20 TCT Cutters & 196 Spacers
- Drum, (4) 1/2" Shafts, 264 Star Cutters
- Drum, (4) 1/2" Shafts, 264 Beam Cutters
- Double-Enforced Drum, (4) 1/2" Shafts, 28 Milling Cutters
Benefits
- Quick‑mount side access drum system design allows operators to change drums in minutes, reducing downtime and increasing daily output. Reduces the risk of hand and impact injuries.
- Pre-mounted assemblies available with drums that arrive ready to install, allowing crews to get to work immediately.
- Engineered drum balance minimizes vibration and ensures consistent, even cutting across the full 8" width for superior surface uniformity.
- Built with up to 5/8" thick cutting shafts to withstand aggressive removal applications and extend service life.
- Achieves up to 1/4" removal per pass depending on cutter selection, ideal for high production surface prep.
- Precision machined drum housings maintain cutter alignment for cleaner cuts, reduced chatter, and longer cutter life.
- Works with a full range of carbide, steel, and specialty cutters designed for extended wear and reduced downtime.
Applications & Usage
- 8″ Walk Behind Scarifier Drum Assemblies for Cutters designed for aggressive concrete surface removal. Efficiently strip coatings, epoxies, paint, traffic lines, thermoplastics, and adhesives to prepare substrates for new flooring systems or overlays.
- Ideal for leveling uneven concrete, asphalt, and stone surfaces, allowing operators to reduce sidewalk trip hazards, eliminate high spots, and correct surface imperfections with controlled, uniform material removal.
- Used to create a wide range of Concrete Surface Profiles (CSP 1–10) by pairing the drum with the appropriate cutter style, enabling proper mechanical bonding for coatings, waterproofing systems, and resurfacing materials.
- Well suited for preparing steel and metal surfaces, removing rust, scale, corrosion, and old coatings. Commonly on ship decks, tanks, bridges, and industrial platforms where mechanical surface conditioning is needed.
- 8″ Walk Behind Scarifier Drum Assemblies for Cutters useful for adhesive and mastic removal. This includes carpet glue, tile mastics, and flooring adhesives, enabling clean substrate preparation for reinstallation or refinishing.
Technical Specifications
Drum Assemblies
Shafts for Drum Assemblies
| Part Number | Description | For Model | IMPA | ISSA | Applications | Included Components |
| 320.002H | 8" Wide Drum Assembly | TFP 200 | 59.22.47 | 55.096.16 | With cutter and brush accessories create a wide range of surface profiles. Remove concrete, paint, corrosion and more. | Drum, (4) 1/2" Shafts |
| 320.060G | 8" Wide Re-enforced Grooving Drum Assembly | TFP 200 | N/A | N/A | With TCT cutters create grooved profiles in concrete for non-slip surfacing and drainage channels. | Re-enforced Grooving Drum, (4) 1/2" Shafts |
| 320.1020ST | 8" Wide Drum Assembly with TCT Cutters | TFP 200 | N/A | N/A | For creating a heavy surface profiles CSP ratings 6-9. Reduce, remove, and roughen concrete, coatings, corrosion and more. | Drum, (4) 1/2" Shafts, 80 TCT Cutters & 88 Spacers |
| 320.1020G | 8" Wide Double-Enforced Drum Assembly with TCT Cutters | TFP 200 | N/A | N/A | For creating grooved profiles in concrete for non-slip surfacing and drainage channels | Re-Enforced Grooving Drum, (4) 1/2" Shafts, 20 TCT Cutters & 196 Spacers |
| 320.1020SS | 8" Wide Drum Assembly with Star Cutters | TFP 200 | N/A | N/A | For creating medium surface profiles CSP ratings 4-5. Reduce, remove, and roughen concrete, laitance, paint, coatings, corrosion and more. | Drum, (4) 1/2" Shafts, 264 Star Cutters |
| 320.1020SB | 8" Wide Drum Assembly with Beam Cutters | TFP 200 | N/A | N/A | For creating a light surface profile CSP rating 3-4. Reduce, remove, and roughen concrete. Remove coatings, laitance, grease, dirt, corrosion, ice and more. | Drum, (4) 1/2" Shafts, 264 Beam Cutters |
| 320.1020SM | 8" Wide Re-enforced Drum Assembly with Milling Cutters | TFP 200 | N/A | N/A | For removing thick and soft materials such as thermoplastics, mastic, waterproofing membranes, glues, plastics and similar. Leaves a light surface profile CSP ratings 3-4. | Double-Enforced Drum, (4) 1/2" Shafts, 28 Milling Cutters |
| Part Number | Description | For Model | IMPA | ISSA | Included Components |
| 320.0020 | (4) 8" Wide Cutter Shafts | TFP 200 | 59.22.49 | 55.096.18 | (4) 1/2" Shafts |
Related PDFs
Catalog PDF 1
CAT_Floor_Scarifiers
Download PDF
Catalog PDF 2
CAT_Metalworking_2024
Download PDF
Catalog PDF 3
CAT_Contractor_Tools_2022
Download PDF
Related Articles
Usage
- 8″ Walk Behind Scarifier Drum Assemblies for Cutters designed for aggressive concrete surface removal. Efficiently strip coatings, epoxies, paint, traffic lines, thermoplastics, and adhesives to prepare substrates for new flooring systems or overlays.
- Ideal for leveling uneven concrete, asphalt, and stone surfaces, allowing operators to reduce sidewalk trip hazards, eliminate high spots, and correct surface imperfections with controlled, uniform material removal.
- Used to create a wide range of Concrete Surface Profiles (CSP 1–10) by pairing the drum with the appropriate cutter style, enabling proper mechanical bonding for coatings, waterproofing systems, and resurfacing materials.
- Well suited for preparing steel and metal surfaces, removing rust, scale, corrosion, and old coatings. Commonly on ship decks, tanks, bridges, and industrial platforms where mechanical surface conditioning is needed.
- 8″ Walk Behind Scarifier Drum Assemblies for Cutters useful for adhesive and mastic removal. This includes carpet glue, tile mastics, and flooring adhesives, enabling clean substrate preparation for reinstallation or refinishing.
Benefits
- Quick‑mount side access drum system design allows operators to change drums in minutes, reducing downtime and increasing daily output. Reduces the risk of hand and impact injuries.
- Pre-mounted assemblies available with drums that arrive ready to install, allowing crews to get to work immediately.
- Engineered drum balance minimizes vibration and ensures consistent, even cutting across the full 8" width for superior surface uniformity.
- Built with up to 5/8" thick cutting shafts to withstand aggressive removal applications and extend service life.
- Achieves up to 1/4" removal per pass depending on cutter selection, ideal for high production surface prep.
- Precision machined drum housings maintain cutter alignment for cleaner cuts, reduced chatter, and longer cutter life.
- Works with a full range of carbide, steel, and specialty cutters designed for extended wear and reduced downtime.
Usage
- 8″ Walk Behind Scarifier Drum Assemblies for Cutters designed for aggressive concrete surface removal. Efficiently strip coatings, epoxies, paint, traffic lines, thermoplastics, and adhesives to prepare substrates for new flooring systems or overlays.
- Ideal for leveling uneven concrete, asphalt, and stone surfaces, allowing operators to reduce sidewalk trip hazards, eliminate high spots, and correct surface imperfections with controlled, uniform material removal.
- Used to create a wide range of Concrete Surface Profiles (CSP 1–10) by pairing the drum with the appropriate cutter style, enabling proper mechanical bonding for coatings, waterproofing systems, and resurfacing materials.
- Well suited for preparing steel and metal surfaces, removing rust, scale, corrosion, and old coatings. Commonly on ship decks, tanks, bridges, and industrial platforms where mechanical surface conditioning is needed.
- 8″ Walk Behind Scarifier Drum Assemblies for Cutters useful for adhesive and mastic removal. This includes carpet glue, tile mastics, and flooring adhesives, enabling clean substrate preparation for reinstallation or refinishing.
Benefits
- Quick‑mount side access drum system design allows operators to change drums in minutes, reducing downtime and increasing daily output. Reduces the risk of hand and impact injuries.
- Pre-mounted assemblies available with drums that arrive ready to install, allowing crews to get to work immediately.
- Engineered drum balance minimizes vibration and ensures consistent, even cutting across the full 8" width for superior surface uniformity.
- Built with up to 5/8" thick cutting shafts to withstand aggressive removal applications and extend service life.
- Achieves up to 1/4" removal per pass depending on cutter selection, ideal for high production surface prep.
- Precision machined drum housings maintain cutter alignment for cleaner cuts, reduced chatter, and longer cutter life.
- Works with a full range of carbide, steel, and specialty cutters designed for extended wear and reduced downtime.
Empty tab. Edit page to add content here.
Empty tab. Edit page to add content here.
