Regular Sockets, 6-Point, 3/4" Drive

Non-sparking regular sockets for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
Non-magnetic regular sockets for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
Corrosion Resistant regular sockets for use in desalination plants, chemical/paper manufacturing, and shipyards.

When ordering, specify:
	A = Aluminum Bronze	B = Copper Beryllium
Example:	Ex1503C-005UA	Ex1503C-005UB

No.	a inch	s inch	l inch	Wt. lbs.
Ex1503C-005U	3/4	3/4	1 5/16	0.53
Ex1503C-010U	3/4	13/16	1 5/16	0.53
Ex1503C-015U	3/4	7/8	1 5/16	0.55
Ex1503C-020U	3/4	15/16	1 5/16	0.57
Ex1503C-025U	3/4	1	1 5/16	0.57
Ex1503C-030U	3/4	1 1/16	2	0.57
Ex1503C-035U	3/4	1 1/8	2	0.57
Ex1503C-040U	3/4	1 3/16	2	0.62
Ex1503C-045U	3/4	1 1/4	2 1/8	0.68
Ex1503C-050U	3/4	1 5/16	2 1/8	0.71
Ex1503C-055U	3/4	1 3/8	2 1/8	0.84
Ex1503C-060U	3/4	1 7/16	2 1/4	1.01
Ex1503C-065U	3/4	1 1/2	2 1/4	1.12
Ex1503C-070U	3/4	1 9/16	2 1/4	1.28
Ex1503C-075U	3/4	1 5/8	2 3/8	1.37
Ex1503C-080U	3/4	1 11/16	2 3/8	1.37
Ex1503C-085U	3/4	1 3/4	2 5/8	1.50
Ex1503C-090U	3/4	1 13/16	2 5/8	1.81
Ex1503C-095U	3/4	1 7/8	2 5/8	1.85
Ex1503C-100U	3/4	1 15/16	2 11/16	1.98
Ex1503C-105U	3/4	2	2 11/16	2.03

When ordering, specify:
	A = Aluminum Bronze	B = Copper Beryllium
Example:	Ex1503C-19A	Ex1503C-19B

No.	a inch	s mm	l mm	Wt. kg
Ex1503C-19	3/4	19	49	0.24
Ex1503C-20	3/4	20	49	0.24
Ex1503C-21	3/4	21	49	0.24
Ex1503C-22	3/4	22	49	0.25
Ex1503C-23	3/4	23	49	0.26
Ex1503C-24	3/4	24	49	0.26
Ex1503C-25	3/4	25	49	0.26
Ex1503C-26	3/4	26	50	0.26
Ex1503C-27	3/4	27	50	0.26
Ex1503C-28	3/4	28	50	0.26
Ex1503C-29	3/4	29	50	0.28
Ex1503C-30	3/4	30	50	0.28
Ex1503C-31	3/4	31	54	0.31
Ex1503C-32	3/4	32	54	0.32
Ex1503C-34	3/4	34	54	0.38
Ex1503C-35	3/4	35	54	0.46
Ex1503C-36	3/4	36	56	0.46
Ex1503C-37	3/4	37	56	0.51
Ex1503C-38	3/4	38	56	0.51
Ex1503C-39	3/4	39	56	0.58
Ex1503C-40	3/4	40	60	0.62
Ex1503C-41	3/4	41	60	0.62
Ex1503C-42	3/4	42	60	0.62
Ex1503C-43	3/4	43	60	0.68
Ex1503C-44	3/4	44	66	0.68
Ex1503C-45	3/4	45	66	0.80
Ex1503C-46	3/4	46	66	0.82
Ex1503C-47	3/4	47	66	0.84
Ex1503C-48	3/4	48	68	0.87
Ex1503C-49	3/4	49	68	0.90
Ex1503C-50	3/4	50	68	0.92

How to Choose the Correct Alloy for Your Application
	Aluminum-Bronze (AlBr) Alloy	Copper-Beryllium (CuBe₂) Alloy
Zone Compatibility	Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2	Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness	27 HRC	38 HRC
Durability	Not as durable as CuBe.	Very durable due to high hardness and tensile strength.
Magnetic Properties	Low magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.	Non-ferrous components; safer for applications demanding non-magnetic properties.
Composition	Al: 10.3% Fe: 4.5% Ni: 4.5% Other: 0.5% Cu: Balance	Be: 1.9% Co + Ni: 0.4% Other: 0.5% Cu: Balance

Use Guidelines
Proper Use	Misuse
Socket wrenches are made in a wide range of sizes and capacities. All have square drives ranging from 1/4" to 1". Drive size is a measure of capacity. Since Detachable Socket wrenches provide an almost endless combination of handles, attachments and sockets, it is possible to assemble a proper tool for almost any type of service within the tool's capacity.	Never use a pipe extension or other form of "cheater" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut. If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness. Hand Sockets should never be used on power drive or impact wrenches.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Downloads:
Complete Safety Tool & Non-Sparking Catalog (PDF) SDS: Cast Aluminum Bronze SDS: Cast Copper Beryllium