Cylindrical Drift
Ex301 Series
- Non-Sparking
- Non-Magnetic
- Corrosion Resistant
- ISO 9001:2015 certified production, TUV materials certified
- Lifetime Warranty
Applications:
- Non-sparking cylindrical drift for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
- Non-magnetic cylindrical drift for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
- Corrosion Resistant cylindrical drift for use in desalination plants, chemical/paper manufacturing, and shipyards.
- Standard Sizes
- Metric Sizes
- Alloys & Use
No. | a inch | b inch | l inch | Wt. lbs. |
---|---|---|---|---|
Ex301-005UB | 1/8 | 3/8 | 4-3/8 | 0.11 |
Ex301-010UB | 1/4 | 7/16 | 4-9/16 | 0.18 |
Ex301-015UB | 5/16 | 9/16 | 4-3/4 | 0.26 |
Ex301-020UB | 3/8 | 5/8 | 5-3/4 | 0.43 |
Ex301-025UB | 7/16 | 11/16 | 6-3/8 | 0.62 |
Ex301-030UB | 9/16 | 3/4 | 7-3/16 | 0.87 |
Ex301-035UB | 5/8 | 15/16 | 8 | 1.37 |
Ex301-040UB | 11/16 | 1-3/16 | 9 | 2.32 |
Ex301-045UB | 3/4 | 1-1/4 | 9 | 2.67 |
Ex301-050UB | 1-1/4 | 1-9/16 | 10 | 5.15 |
Copper Beryllium (CuBe) only
No. | a mm | b mm | l mm | Wt. kg |
---|---|---|---|---|
Ex301-4B | 4 | 10 | 110 | 0.05 |
Ex301-6B | 6 | 12 | 115 | 0.08 |
Ex301-7B | 7 | 14 | 120 | 0.12 |
Ex301-8B | 8 | 14 | 120 | 0.12 |
Ex301-10B | 10 | 16 | 145 | 0.20 |
Ex301-12B | 12 | 18 | 160 | 0.28 |
Ex301-14B | 14 | 20 | 180 | 0.40 |
Ex301-16B | 16 | 24 | 200 | 0.62 |
Ex301-18B | 18 | 30 | 225 | 1.05 |
Ex301-20B | 20 | 32 | 225 | 1.21 |
Ex301-32B | 32 | 40 | 250 | 2.34 |
Copper Beryllium (CuBe) only
Aluminum-Bronze (AlBr) Alloy | Copper-Beryllium (CuBe2) Alloy | |
---|---|---|
Zone Compatibility | Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2 | Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2 |
Hardness | 27 HRC | 38 HRC |
Durability | Not as durable as CuBe. | Very durable due to high hardness and tensile strength. |
Magnetic Properties | Low magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications. | Non-ferrous components; safer for applications demanding non-magnetic properties. |
Composition | Al: 10.3% Fe: 4.5% Ni: 4.5% Other: 0.5% Cu: Balance | Be: 1.9% Co + Ni: 0.4% Other: 0.5% Cu: Balance |
Proper Use | Misuse |
Drift pins are designed for aligning holes in metal. | Never use a drift pin as a punch. Never strike a drift pin if either end is chipped or mushroomed. |
View Prop 65 Warnings Here
Downloads: |
---|