Ball Peen Hammer

When ordering, specify:

	A = Aluminum Bronze	B = Copper Beryllium
Example:	Ex101U-0025A	Ex101U-0025B

 

No.	H lbs.	H kg	Handle Length
Ex101U-0025	0.25	0.12	10"/250mm
Ex101U-0075	0.75	0.34	13.75"/350mm
Ex101U-0100	1.00	0.46	13.75"/350mm
Ex101U-0150	1.50	0.68	14"/360mm
Ex101U-0200	2.00	0.91	14"/360mm
Ex101U-0225	2.25	1.02	14"/360mm
Ex101U-0275	2.75	1.25	14"/360mm

How to Choose the Correct Alloy for Your Application

	Aluminum-Bronze (AlBr) Alloy	Copper-Beryllium (CuBe2) Alloy
Zone Compatibility	Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2	Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness	27 HRC	38 HRC
Durability	Not as durable as CuBe.	Very durable due to high hardness and tensile strength.
Magnetic Properties	Low magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.	Non-ferrous components; safer for applications demanding non-magnetic properties.
Composition	Al: 10.3% Fe: 4.5% Ni: 4.5% Other: 0.5% Cu: Balance	Be: 1.9% Co + Ni: 0.4% Other: 0.5% Cu: Balance

For More Information on Choosing The Correct Alloy for Your Application - Click Here  

Use Guidelines

Proper Use	Misuse
Ball peen hammers of the proper size are designed for striking chisels and punches, and for riveting, shaping and straightening unhardened metal. When striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3/8" larger than the struck face of the tool.	Strike squarely and avoid glancing blows that may cause the edge of the face to chip, possibly resulting in eye or other serious injury. Never strike with or against the side, or cheek, of any hammer.

This product can expose you to chemicals including Nickel (Ni) that is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov