Chisel, Bull Point

Ex318R and Ex320R Series

  • Ex318R Non-Sparking, Non-Magnetic Bull Point Chisel
  • Ex318R Non-Sparking, Non-Magnetic Bull Point Chisel Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex318R Non-Sparking, Non-Magnetic Bull Point Chisel
  • Ex318R Non-Sparking, Non-Magnetic Bull Point Chisel Dimensional Drawing
  • Lifetime warranty Non-sparking Tools

 

  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2015 certified production, TUV materials certified
  • Lifetime Warranty
Request a Quote
View Our ATEX Power Tools

Applications:

  • Non-sparking bull point chisel for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic bull point chisel for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant bull point chisel for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Ex318R - 1-1/8" Hex Shank
  • Ex320R - 1-1/4" Hex Shank
  • Alloys & Use
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex318R-14AEx318R-14B
No.Materiall
inch
a
inch
c
inch
Wt.
lbs.
l
mm
Wt.
kg
Ex318R-14AAluminum
Bronze		19-5/1613-5/16664902.72
Ex318R-14BCopper
Beryllium		19-5/1613-5/16664902.72
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex320R-14AEx320R-14B
No.Material
l
inch
a
inch
c
inch
Wt.
lbs.
l
mm
Wt.
kg
Ex320R-14AAluminum Bronze19-1/413-1/4674893.18
Ex320R-14BCopper Beryllium19-1/413-1/4674893.18
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance		Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance

For More Information on Choosing The Correct Alloy for Your Application - Click Here
 
Use Guidelines
Proper UseMisuse
Chisels have a cutting edge at one end for cutting,
shaping and removing metal softer than the cutting edge itself
such as cast iron, wrought iron, steel, bronze, copper, etc. and
a struck face on the opposite end.		Never use chisels for cutting or splitting stone or
concrete. Never use a dull chisel or one with a
mushroomed
head. Never use a chisel with a loose or
damaged handle.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Downloads: