Scaling Chisel

Ex312 Series

  • Ex312 Non-Sparking, Non-Magnetic Scaling Chisel
  • Ex312 Non-Sparking, Non-Magnetic Scaling Chisel Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex312 Non-Sparking, Non-Magnetic Scaling Chisel
  • Ex312 Non-Sparking, Non-Magnetic Scaling Chisel Dimensional Drawing
  • Lifetime warranty Non-sparking Tools

 

  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2015 certified production, TUV materials certified
  • Lifetime Warranty
Request a Quote
View Our ATEX Power Tools

Applications:

  • Non-sparking scaling chisel for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic scaling chisel for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant scaling chisel for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Standard Sizes
  • ALLOYS & USE
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex312-25AEx312-25B
No.Material
b
inch
l
inch
Wt.
lbs.
b
mm
l
mm
Wt.
kg
Shank
Ex312-25A
Aluminum
Bronze
14-15/160.30251250.14Weld flux 1/2" quarter octagon shank
Ex312-25B
Copper
Beryllium
14-15/160.30251250.14Weld flux 1/2" quarter octagon shank
Ex312-50AAluminum
Bronze		24-15/160.35501250.16Weld flux 1/2" quarter octagon shank
Ex312-50BCopper
Beryllium		24-15/160.35501250.16Weld flux 1/2" quarter octagon shank
Ex312L-25AAluminum
Bronze		17-7/80.35252000.16Weld flux 1/2" quarter octagon shank
Ex312L-25BCopper
Beryllium		17-7/80.35252000.16Weld flux 1/2" quarter octagon shank
Ex312L-50AAluminum
Bronze		27-7/80.70502000.32Weld flux 1/2" quarter octagon shank
Ex312L-50BCopper
Beryllium		27-7/80.70502000.32Weld flux 1/2" quarter octagon shank
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance		Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance

For More Information on Choosing The Correct Alloy for Your Application - Click Here
 
Use Guidelines
Proper UseMisuse
Chisels have a cutting edge at one end for cutting,
shaping and removing metal softer than the cutting edge itself
such as cast iron, wrought iron, steel, bronze, copper, etc. and
a struck face on the opposite end.		Never use chisels for cutting or splitting stone or
concrete. Never use a dull chisel or one with a
mushroomed
head. Never use a chisel with a loose or
damaged handle.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Downloads: