Cylindrical Drift

Ex301 Series

  • Ex301 Cylindrical Drift
  • Ex301 Cylindrical Drift Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex301 Cylindrical Drift
  • Ex301 Cylindrical Drift Dimensional Drawing
  • Lifetime warranty Non-sparking Tools

 

  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2015 certified production, TUV materials certified
  • Lifetime Warranty

Applications:

  • Non-sparking cylindrical drift for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic cylindrical drift for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant cylindrical drift for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Standard Sizes
  • Metric Sizes
  • Alloys & Use
No.
a
inch
b
inch
l
inch
Wt.
lbs.
Ex301-005UB1/83/84-3/80.11
Ex301-010UB1/47/164-9/160.18
Ex301-015UB5/169/164-3/40.26
Ex301-020UB3/85/85-3/40.43
Ex301-025UB7/1611/166-3/80.62
Ex301-030UB9/163/47-3/160.87
Ex301-035UB5/815/1681.37
Ex301-040UB11/161-3/1692.32
Ex301-045UB3/41-1/492.67
Ex301-050UB1-1/41-9/16105.15

Copper Beryllium (CuBe) only
 
No.
a
mm
b
mm
l
mm
Wt.
kg
Ex301-4B4101100.05
Ex301-6B6121150.08
Ex301-7B7141200.12
Ex301-8B8141200.12
Ex301-10B10161450.20
Ex301-12B12181600.28
Ex301-14B14201800.40
Ex301-16B16242000.62
Ex301-18B18302251.05
Ex301-20B20322251.21
Ex301-32B32402502.34

Copper Beryllium (CuBe) only
 
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance
Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance
 
Use Guidelines
Proper UseMisuse
Drift pins are designed for aligning holes in metal.Never use a drift pin as a punch. Never strike a drift pin if
either end is chipped or mushroomed.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Downloads: