Extension Bar

Ex1504 Series

  • Ex1504 Extension Bar
  • Ex1504 Extension Bar Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex1504 Extension Bar
  • Ex1504 Extension Bar Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2008 certified production, TUV materials certified
  • Lifetime Warranty

Applications:

  • Non-sparking Ex1504 Extension Bar for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic Ex1504 Extension Bar for MRI/NMR use, nuclear products, electronic manufacturing, and other sensitive equipment types.
  • Corrosion-resistant extension bar for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Standard Sizes
  • ALLOYS & USE
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex1504AA-100AAEx1504AA-100AB

 


No.a inchl inchWt. lbs.l mmWt. kg
Ex1504AA-100A1/440.121000.05
Ex1504AA-200A1/480.212000.10
Ex1504A-75A3/830.15750.07
Ex1504A-100A3/840.211000.10
Ex1504A-150A3/860.331500.15
Ex1504B-100A1/240.571000.26
Ex1504B-200A1/280.902000.41
Ex1504B-250A1/2101.062500.48
Ex1504C-100A3/441.281000.58
Ex1504C-200A3/4102.122000.96
Ex1504C-250A3/4102.512501.14
Ex1504D-100A142.201001.00
Ex1504D-250A1104.282501.95
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance
Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance
 
Use Guidelines
Proper UseMisuse
Socket wrenches are made in a wide range of sizes and capacities. All have square drives ranging from 1/4" to 1". Drive size is a measure of capacity.
Since Detachable Socket wrenches provide an almost endless combination of handles, attachments and sockets, it is possible to assemble a proper tool for almost any type of service within the tool's capacity.
Never use a pipe extension or other form
of "cheater" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut.
If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness.
Hand Sockets should never be used on power drive or impact wrenches.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Downloads: