Socket Wrench, L-Type, 6-point

Non-sparking socket wrench for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
Non-magnetic socket wrench for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
Corrosion Resistant socket wrench for use in desalination plants, chemical/paper manufacturing, and shipyards.

When ordering, specify:
	A = Aluminum Bronze	B = Copper Beryllium
Example:	Ex701-005UA	Ex701-005UB

No.	s inch	a inch	l inch	Wt. lbs.
Ex701-005U	1/4	7/8	3 3/4	0.08
Ex701-010U	5/16	1 7/16	4 1/4	0.22
Ex701-015U	11/32	1 7/16	6 7/16	0.33
Ex701-020U	3/8	1 7/16	6 7/16	0.22
Ex701-025U	13/32	1 7/16	6 7/16	0.33
Ex701-030U	7/16	1 7/16	6 7/16	0.33
Ex701-035U	1/2	1 7/16	6 7/16	0.37
Ex701-040U	9/16	1 7/16	6 7/16	0.35
Ex701-045U	19/32	1 7/16	6 7/16	0.35
Ex701-050U	5/8	2 1/16	8 7/16	0.66
Ex701-055U	11/16	2 1/16	8 7/16	0.66
Ex701-060U	3/4	2 1/16	8 7/16	0.77
Ex701-065U	25/32	2 1/16	8 7/16	0.81
Ex701-070U	13/16	2 1/4	8 7/16	0.82
Ex701-075U	7/8	2 1/4	8 7/16	0.77
Ex701-080U	15/16	2 1/4	9 9/16	0.88
Ex701-085U	31/32	2 1/4	9 9/16	0.92
Ex701-090U	1	2 1/4	9 9/16	0.98
Ex701-095U	1 1/16	2 1/4	9 9/16	1.04
Ex701-100U	1 1/8	2 1/4	9 9/16	1.01
Ex701-105U	1 3/16	2 9/16	10 3/8	1.85
Ex701-110U	1 1/4	2 9/16	10 3/8	1.79

When ordering, specify:
	A = Aluminum Bronze	B = Copper Beryllium
Example:	Ex701-6A	Ex701-6B

No.	s mm	a mm	l mm	Wt. kg
Ex701-6	6	23	95	0.037
Ex701-8	8	37	107	0.100
Ex701-9	9	37	107	0.100
Ex701-10	10	37	107	0.120
Ex701-11	11	37	161	0.150
Ex701-12	12	37	161	0.150
Ex701-13	13	37	161	0.170
Ex701-14	14	37	161	0.170
Ex701-15	15	37	161	0.160
Ex701-16	16	52	211	0.300
Ex701-17	17	52	211	0.300
Ex701-18	18	52	211	0.350
Ex701-19	19	52	211	0.350
Ex701-20	20	57	211	0.350
Ex701-21	21	57	211	0.370
Ex701-22	22	57	211	0.350
Ex701-23	23	57	240	0.410
Ex701-24	24	57	240	0.400
Ex701-25	25	57	240	0.470
Ex701-26	26	57	240	0.470
Ex701-27	27	57	240	0.470
Ex701-28	28	57	240	0.460
Ex701-29	29	57	240	0.460
Ex701-30	30	65	260	0.840
Ex701-32	32	65	260	0.810

How to Choose the Correct Alloy for Your Application
	Aluminum-Bronze (AlBr) Alloy	Copper-Beryllium (CuBe₂) Alloy
Zone Compatibility	Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2	Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness	27 HRC	38 HRC
Durability	Not as durable as CuBe.	Very durable due to high hardness and tensile strength.
Magnetic Properties	Low magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.	Non-ferrous components; safer for applications demanding non-magnetic properties.
Composition	Al: 10.3% Fe: 4.5% Ni: 4.5% Other: 0.5% Cu: Balance	Be: 1.9% Co + Ni: 0.4% Other: 0.5% Cu: Balance

Use Guidelines
Proper Use	Misuse
Socket wrenches are made in a wide range of sizes and capacities. All have square drives ranging from 1/4" to 1". Drive size is a measure of capacity. Since Detachable Socket wrenches provide an almost endless combination of handles, attachments and sockets, it is possible to assemble a proper tool for almost any type of service within the tool's capacity.When striking a struck tool (chisel or punch), the striking face of the hammer should have a diameter at least 3/8" larger than the struck face of the tool.	Never use a pipe extension or other form of "cheater" to increase the leverage of any wrench. Select a wrench whose opening exactly fits the nut. If possible, always pull on a wrench handle and adjust your stance to prevent a fall if something lets go. There are three types of Sockets hand, power and impact all different in design and hardness. Hand Sockets should never be used on power drive or impact wrenches.