Striking Wrench, Open End

Non-sparking open end striking wrench for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
Non-magnetic open end striking wrench for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
Corrosion Resistant open end striking wrench for use in desalination plants, chemical/paper manufacturing, and shipyards.

*More sizes available. Contact us for information.*
When ordering, specify:
	A = Aluminum Bronze	B = Copper Beryllium
Example:	Ex200-010UA	Ex200-010UB

No.	S inch	l inch	Wt. lbs.
Ex200-010U	11/16	5 9/16	0.40
Ex200-015U	3/4	5 9/16	0.42
Ex200-020U	7/8	6	0.57
Ex200-025U	15/16	6 3/8	0.73
Ex200-030U	1	7 3/16	0.95
Ex200-035U	1 1/16	7 3/16	0.95
Ex200-040U	1 1/8	7 3/16	0.95
Ex200-045U	1 3/16	7 9/16	1.17
Ex200-050U	1 1/4	7 9/16	1.17
Ex200-055U	1 5/16	7 3/4	1.28
Ex200-060U	1 3/8	8 3/8	1.87
Ex200-065U	1 7/16	8 3/8	1.87
Ex200-070U	1 1/2	8 3/8	2.16
Ex200-075U	1 9/16	9	2.20
Ex200-080U	1 5/8	9	2.29
Ex200-085U	1 11/16	9	2.81
Ex200-090U	1 3/4	9	2.81
Ex200-095U	1 13/16	9	3.26
Ex200-100U	1 7/8	11	3.52
Ex200-105U	2	11 3/16	3.77
Ex200-110U	2 1/16	11 3/16	4.85
Ex200-115U	2 1/8	12 1/4	4.85
Ex200-120U	2 3/16	12 3/8	4.85
Ex200-125U	2 1/4	12 3/8	4.85
Ex200-130U	2 5/16	12 3/4	6.08
Ex200-135U	2 3/8	12 3/4	6.08
Ex200-140U	2 7/16	14	9.61
Ex200-145U	2 1/2	14	9.61
Ex200-150U	2 9/16	14	9.61
Ex200-155U	2 5/8	15	10.69
Ex200-160U	2 3/4	15	10.69
Ex200-165U	2 13/16	15	10.69
Ex200-170U	2 15/16	15 3/4	12.26
Ex200-175U	3	15 3/4	12.26
EX200-180U	3 1/8	15 3/4	12.26
Ex200-185U	3 1/4	16 9/16	14.33
Ex200-190U	3 3/8	16 9/16	14.33
Ex200-195U	3 1/2	16 9/16	14.33
Ex200-200U	3 5/8	18	17.86
Ex200-205U	3 3/4	18	17.86
Ex200-210U	3 7/8	18	17.86

*More sizes available. Contact us for information.*
When ordering, specify:
	A = Aluminum Bronze	B = Copper Beryllium
Example:	Ex200-17A	Ex200-17B

No.	S mm	l mm	Wt. kg
Ex200-17	17	140	0.18
Ex200-18	18	140	0.18
Ex200-19	19	140	0.19
Ex200-22	22	150	0.26
Ex200-24	24	160	0.33
Ex200-26	26	180	0.43
Ex200-27	27	180	0.43
Ex200-28	28	180	0.43
Ex200-29	29	190	0.53
Ex200-30	30	190	0.53
Ex200-32	32	195	0.58
Ex200-35	35	210	0.85
Ex200-36	36	210	0.85
Ex200-37	37	210	0.85
Ex200-38	38	225	0.98
Ex200-41	41	225	1.04
Ex200-42	42	225	1.10
Ex200-46	46	255	1.48
Ex200-50	50	280	1.71
Ex200-52	52	280	2.20
Ex200-55	55	310	2.20
Ex200-56	56	310	2.20
Ex200-60	60	320	2.76
Ex200-63	63	350	4.36
Ex200-65	65	350	4.36
Ex200-70	70	375	4.85
Ex200-75	75	395	5.56
Ex200-80	80	410	6.20
Ex200-85	85	415	6.50
Ex200-90	90	435	7.45
Ex200-95	95	450	8.10

How to Choose the Correct Alloy for Your Application
	Aluminum-Bronze (AlBr) Alloy	Copper-Beryllium (CuBe₂) Alloy
Zone Compatibility	Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2	Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness	27 HRC	38 HRC
Durability	Not as durable as CuBe.	Very durable due to high hardness and tensile strength.
Magnetic Properties	Low magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.	Non-ferrous components; safer for applications demanding non-magnetic properties.
Composition	Al: 10.3% Fe: 4.5% Ni: 4.5% Other: 0.5% Cu: Balance	Be: 1.9% Co + Ni: 0.4% Other: 0.5% Cu: Balance

Use Guidelines
Proper Use	Misuse
Open-End wrenches are designed for a wide variety of work. Their box opening adds still more to their versatility and strength. The Flare Nut pattern with its hex box opening is especially useful in air conditioning and refrigeration work where tubing terminates on flare nuts. The thinner and slimmer electronic pattern is designed for work where access and clearance are limited.	Do not use the open end of these wrenches to free a "frozen" nut or final tighten a hex nut. Use the box opening. Never use a hammer on any wrench other than a Striking Face wrench. Never use an extension on the wrench handle.