10″ Gas Concrete Floor Grinder & Polisher
- Motor Power: 5.5 HP
- Cutting Width: 10″
- Cutting Depth per Pass: 0.04″
- Production Rate: Up to 500 sq. ft. per hour
Includes (testing):
-
10″ Gas Concrete Floor Grinder & Polisher
Benefits
- Upgraded solid-state electronics, thick-welded steel frame, and tapered roller bearings engineered for long service life and minimal maintenance.
- Wide selection of abrasive discs and diamond inserts with a universal mount and a quick-release diamond plate for fast changeovers.
- Integrated dust-collection port and push-to-run safety switch for safer, cleaner operation.
- Direct-weight-transfer design and adjustable grinder head maximize productivity and grinding efficiency.
- Rear-mounted leveling kit allows precise adjustment of grinding discs and accessory plates.
- Suitable for wet or dry applications with an integrated water supply and broad diamond accessory compatibility.
- Low-clearance profile makes edge and corner grinding easier.
- Easy to maneuver with reduced torque steer and ergonomic, operator-friendly controls.
Applications & Usage
- 10″ Gas Concrete Floor Grinder is engineered for leveling high spots, removing coatings and adhesives, and preparing concrete surfaces for new flooring systems.
- Ideal for small to medium‑sized jobs where efficient surface preparation, coating removal, or concrete polishing is required.
- 10″ Gas Concrete Floor Grinder removes coatings such as epoxies, paint, thermoplastics, traffic lines, and carpet adhesives with consistent, high performance results.
- Optimized grinding pressure and motor speed make it highly effective for polishing concrete, asphalt, and stone surfaces. Creates a smooth, professional finish.
- Flexible grinding head maintains maximum contact on uneven or rough concrete, ensuring uniform surface preparation across the entire work area.
- Suitable for repairing concrete damaged by rain, surface defects, or improper finishing, restoring a clean and even substrate.
- Integrated wet and dry capabilities, the grinder adapts to a wide range of jobsite conditions and application requirements.
Technical Specifications
| Model Number | 345.2000QR |
| Engine Type | Honda GXV160 |
| Motor Power | 5.5 HP |
| Max Cutting Depth per Pass | .04" (1mm) |
| Cutting Width | 10" |
| Dimensions (WxLxH) | 18"x43"x39" |
| Production Rate/Hour | Up to 500 sq. ft. per hour |
| Average Cutter Life | 10,500 sq. ft. |
| Vacuum Port Diameter | 2" |
| Weight | 198 lbs. |
| Vibration Levels | 6 m/s2 |
Optional Accessories
Optional
Optional
Optional
OptionalRelated PDFs
Catalog PDF 1
CAT_Concrete_Grinders
Download PDF
Catalog PDF 2
CAT_Contractor_Tools_2022
Download PDF
Usage
- 10″ Gas Concrete Floor Grinder is engineered for leveling high spots, removing coatings and adhesives, and preparing concrete surfaces for new flooring systems.
- Ideal for small to medium‑sized jobs where efficient surface preparation, coating removal, or concrete polishing is required.
- 10″ Gas Concrete Floor Grinder removes coatings such as epoxies, paint, thermoplastics, traffic lines, and carpet adhesives with consistent, high performance results.
- Optimized grinding pressure and motor speed make it highly effective for polishing concrete, asphalt, and stone surfaces. Creates a smooth, professional finish.
- Flexible grinding head maintains maximum contact on uneven or rough concrete, ensuring uniform surface preparation across the entire work area.
- Suitable for repairing concrete damaged by rain, surface defects, or improper finishing, restoring a clean and even substrate.
- Integrated wet and dry capabilities, the grinder adapts to a wide range of jobsite conditions and application requirements.
Benefits
- Upgraded solid-state electronics, thick-welded steel frame, and tapered roller bearings engineered for long service life and minimal maintenance.
- Wide selection of abrasive discs and diamond inserts with a universal mount and a quick-release diamond plate for fast changeovers.
- Integrated dust-collection port and push-to-run safety switch for safer, cleaner operation.
- Direct-weight-transfer design and adjustable grinder head maximize productivity and grinding efficiency.
- Rear-mounted leveling kit allows precise adjustment of grinding discs and accessory plates.
- Suitable for wet or dry applications with an integrated water supply and broad diamond accessory compatibility.
- Low-clearance profile makes edge and corner grinding easier.
- Easy to maneuver with reduced torque steer and ergonomic, operator-friendly controls.
Usage
- 10″ Gas Concrete Floor Grinder is engineered for leveling high spots, removing coatings and adhesives, and preparing concrete surfaces for new flooring systems.
- Ideal for small to medium‑sized jobs where efficient surface preparation, coating removal, or concrete polishing is required.
- 10″ Gas Concrete Floor Grinder removes coatings such as epoxies, paint, thermoplastics, traffic lines, and carpet adhesives with consistent, high performance results.
- Optimized grinding pressure and motor speed make it highly effective for polishing concrete, asphalt, and stone surfaces. Creates a smooth, professional finish.
- Flexible grinding head maintains maximum contact on uneven or rough concrete, ensuring uniform surface preparation across the entire work area.
- Suitable for repairing concrete damaged by rain, surface defects, or improper finishing, restoring a clean and even substrate.
- Integrated wet and dry capabilities, the grinder adapts to a wide range of jobsite conditions and application requirements.
Benefits
- Upgraded solid-state electronics, thick-welded steel frame, and tapered roller bearings engineered for long service life and minimal maintenance.
- Wide selection of abrasive discs and diamond inserts with a universal mount and a quick-release diamond plate for fast changeovers.
- Integrated dust-collection port and push-to-run safety switch for safer, cleaner operation.
- Direct-weight-transfer design and adjustable grinder head maximize productivity and grinding efficiency.
- Rear-mounted leveling kit allows precise adjustment of grinding discs and accessory plates.
- Suitable for wet or dry applications with an integrated water supply and broad diamond accessory compatibility.
- Low-clearance profile makes edge and corner grinding easier.
- Easy to maneuver with reduced torque steer and ergonomic, operator-friendly controls.
Empty tab. Edit page to add content here.
Empty tab. Edit page to add content here.
