Double-Face Machinists' Hammer

Ex103U Series

  • Ex103U Double-Face Machinists' Hammer
  • Ex103U Double-Face Machinists' Hammer Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex103U Double-Face Machinists' Hammer
  • Ex103U Double-Face Machinists' Hammer Dimensional Drawing
  • Lifetime warranty Non-sparking Tools

 

  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2015 certified production, TUV materials certified
  • Lifetime Warranty

Hammer handle appearance may vary from photos shown.

Applications:

  • Non-sparking double-face machinists' hammers for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic double-face machinists' hammers for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant double-face machinists' hammers for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Standard Sizes
  • Alloys & Use
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex103U-0025AEx103U-0025B
No.H
lbs.
H
kg
Handle Length
Ex103U-00250.250.1210"/250mm
Ex103U-01501.500.6814.25"/360mm
Ex103U-01751.750.8014.25"/360mm
Ex103U-02002.000.9114.25"/360mm
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance
Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance

For More Information on Choosing The Correct Alloy for Your Application - Click Here
 
Use Guidelines
Proper UseMisuse
Double face machinist's hammers are designed for general sledging operations in striking wood, metal, concrete or stone. Common uses are drifting heavy timbers and striking spikes,cold chisels, rock drills and hardened nails.Never use a double face machinist's hammer to strike a hammer, sledge, or maul. Never use a double face machinist's hammer with a loose or damaged handle.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Downloads: