Bricklayers' Hammer

Ex112U Series

  • Ex112U Bricklayers' Hammer
  • Ex112U Bricklayers' Hammer Dimensional Drawing
  • Lifetime warranty Non-sparking Tools
  • Ex112U Bricklayers' Hammer
  • Ex112U Bricklayers' Hammer Dimensional Drawing
  • Lifetime warranty Non-sparking Tools

 

  • Non-Sparking
  • Non-Magnetic
  • Corrosion Resistant
  • ISO 9001:2015 certified production, TUV materials certified
  • Lifetime Warranty

Hammer handle appearance may vary from photos shown.

Request a Quote
View Our ATEX Power Tools

Applications:

  • Non-sparking bricklayers' hammer for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
  • Non-magnetic bricklayers' hammer for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
  • Corrosion Resistant bricklayers' hammer for use in desalination plants, chemical/paper manufacturing, and shipyards.

  • Standard Sizes
  • ALLOYS & USE
When ordering, specify:
 A = Aluminum BronzeB = Copper Beryllium
Example:Ex112U-0150AEx112U-0150B
No.H
lbs.		H
kg		Handle Length
Ex112U-01501.500.6814.25"/360mm
How to Choose the Correct Alloy for Your Application
 Aluminum-Bronze (AlBr) AlloyCopper-Beryllium (CuBe2) Alloy
Zone CompatibilityFulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2
Hardness27 HRC38 HRC
DurabilityNot as durable as CuBe.Very durable due to high hardness and tensile strength.
Magnetic PropertiesLow magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications.Non-ferrous components; safer for applications demanding non-magnetic properties.
CompositionAl: 10.3%
Fe: 4.5%
Ni: 4.5%
Other: 0.5%
Cu: Balance		Be: 1.9%
Co + Ni: 0.4%
Other: 0.5%
Cu: Balance

For More Information on Choosing The Correct Alloy for Your Application - Click Here
 
Use Guidelines
Proper UseMisuse
Bricklayers' hammers are designed for setting and cutting (splitting) bricks, masonry tile and concrete blocks, and for chipping mortar from bricks.Never use a brick hammer to strike other steel tools of any type, or to drive hardened nails. The striking face or blade may chip, possibly resulting in eye or other serious injury.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Downloads: