Pin Punch
Ex301P Series
- Non-Sparking
- Non-Magnetic
- Corrosion Resistant
- ISO 9001:2015 certified production, TUV materials certified
- Lifetime Warranty
Applications:
- Non-sparking pin punch for use in petrochemical, grain production (explosive-dust), utilities, and hazmat applications.
- Non-magnetic pin punch for use in MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment.
- Corrosion Resistant pin punch for use in desalination plants, chemical/paper manufacturing, and shipyards.
- Standard Sizes
- Metric Sizes
- Alloys & Use
No. | a inch | b inch | l inch | Wt. lbs. |
---|---|---|---|---|
Ex301P-005UB | 7/128 | 3/8 | 4 3/8 | 0.10 |
Ex301P-010UB | 9/128 | 3/8 | 4 3/8 | 0.10 |
Ex301P-015UB | 1/16 | 3/8 | 6 | 0.16 |
Ex301P-020UB | 3/32 | 3/8 | 4 3/8 | 0.10 |
Ex301P-025UB | 7/64 | 3/8 | 4 3/8 | 0.11 |
Ex301P-030UB | 1/8 | 3/8 | 6 | 0.15 |
Ex301P-035UB | 3/16 | 3/8 | 6 | 0.15 |
Ex301P-040UB | 1/4 | 3/8 | 6 | 0.16 |
Ex301P-045UB | 5/16 | 7/16 | 6 | 0.25 |
Ex301P-050UB | 3/8 | 9/16 | 6 | 0.35 |
No. | a mm | b mm | l mm | Wt. kg |
---|---|---|---|---|
Ex301P-1.4B | 1.4 | 10 | 110 | 0.05 |
Ex301P-1.8B | 1.8 | 10 | 110 | 0.05 |
Ex301P-2B | 2 | 10 | 150 | 0.07 |
Ex301P-2.4B | 2.4 | 10 | 110 | 0.05 |
Ex301P-2.8B | 2.8 | 10 | 110 | 0.05 |
Ex301P-3B | 3 | 10 | 150 | 0.07 |
Ex301P-4B | 4 | 10 | 150 | 0.07 |
Ex301P-5B | 5 | 10 | 150 | 0.07 |
Ex301P-6B | 6 | 10 | 150 | 0.07 |
Ex301P-7B | 7 | 12 | 150 | 0.11 |
Ex301P-8B | 8 | 12 | 150 | 0.11 |
Ex301P-10B | 10 | 14 | 150 | 0.16 |
Aluminum-Bronze (AlBr) Alloy | Copper-Beryllium (CuBe2) Alloy | |
---|---|---|
Zone Compatibility | Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2 | Fulfill demand in ATEX Directive 1999/92/EC for work in Zones 0, 1, 2, 20, 21 and 22, M1 & M2 |
Hardness | 27 HRC | 38 HRC |
Durability | Not as durable as CuBe. | Very durable due to high hardness and tensile strength. |
Magnetic Properties | Low magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications. | Non-ferrous components; safer for applications demanding non-magnetic properties. |
Composition | Al: 10.3% Fe: 4.5% Ni: 4.5% Other: 0.5% Cu: Balance | Be: 1.9% Co + Ni: 0.4% Other: 0.5% Cu: Balance |
Proper Use | Misuse |
Drift pins are designed for aligning holes in metal. | Never use a drift pin as a punch. Never strike a drift pin if either end is chipped or mushroomed. |
View Prop 65 Warnings Here
Downloads: |
---|