Search

Change discs by hand, without tools

• For flap discs with 7/8" arbor

• Carbide-tipped for long life
• Quick, efficient cutting through rust and corrosion
• Round, clean, burr-free holes - better than spade drills

• 1" effective length
• Center twist pilot drill
• Diameters from 9/16" to 4-1/2"

• 5/8" effective length
• Spring-loaded pilot pin
• Diameters from 9/16" to 1-3/8"

• Tungsten Carbide-Tipped
• Designed to cut multiple layers of stacked material
• Available in 2", 3" and 4" depths

• High-Speed Steel (HSS)
• Designed to cut multiple layers of stacked material
• Available in 1", 2" and 3" depths

Part Nos. EKF 300.3, EKF 450.3 & EKF 452.3

• Bevel 30°, 45° or 2.5mm radius
• Three milling head options
• Land width up to 1/4"

Part No. SKF 025

• Variable angle (15° to 60°)
• Bevel Land widths up to 3/4"
• Pipe beveling over 6-1/4" OD

• Carbide-Tipped for Maximum Performance
• Diameters from 5/32" - 1"; 2" - 21" usable lengths
• Extended drilling life
• Lower cost per hole

• Carbide-Tipped SDS Max Drill Bits
• Diameters from 1" - 1-3/8"; 8" - 30-3/4" usable lengths
• Extended drilling life
• Lower cost per hole

• High reliability for continuous, heavy-duty use
• Flat, moil point, scaling, slotting and more

• Diameters from 1" - 6"
• 6" overall length with optional extensions
• Designed for Air and Hydraulic SDS Max rotary hammer drills

Drill perfect holes in tile and stone from 5/32" to 3/4" dia. in seconds

• Wet drilling with mini diamond core bits
• Variable 0-8000 RPM for easy starting... and fast drilling
• Depth gauge and centering aids

Holes up to 6" diameter

• Wet drilling
• 15 Amp motor
• Load Speeds: 600 / 1300 / 2800 RPM

• Drill through block and brick
• 7mm diamond segment height

• Ideal for deep drilling in reinforced concrete and masonry
• Threaded barrels from 12" to 48" long

• For use with Diamond Core Bits

• For use with END 712 and END 1550 P core drills
• Bits from 5/32" to 3/4"

• For use with the END 1550 P core drill
• Ideal for drilling anchor holes and dowel holes

• For use when drilling through a combination of concrete and steel
• 11" and 12" usable lengths available

• Electric and pneumatic available

• For all drills

• For cured concrete and masonry
• Drill up to 8" deep
• 1-1/4" - 12 female threaded hub

• Sharpening Block  8" x 4" x 2"
• Sharpening Plate  12-5/8" x 12-5/8" x 2-1/4"
• For Use With Diamond Core Drill Bits

• 12" overall length

Filters, bags & tool kits for models:

• 303.10KAV30/D
• 303.10KAV30/WD

• Helps maintain maximum RPM under full load
• For CSU Series electric magnetic drills

• Tap collets with 3/4" or 1-1/4" Weldon shank
• Reducing sleeve
• Bushing – reduces Weldon shank

Tapping chucks and collets