Scabblers & Tampers
Scabblers & Tampers
Concrete Scabblers and Tampers
Resurfacing concrete starts with proper preparation. If the base material isn’t ready, coatings and overlays won’t bond the way they should. CS Unitec’s concrete scabblers deliver the impact force needed to break up old coatings, reduce uneven areas, and create a clean surface ready for repair or finishing.
Durable electric, hydraulic, and pneumatic scabblers built for demanding construction and industrial environments. Made from robust materials and engineered for consistent performance, our tools help crews restore concrete surfaces efficiently and safely—whether on factory floors, pedestrian walkways, or busy roadways.
Our lineup covers a wide range of job requirements and work conditions:
- Handheld concrete scabblers
- Heavy-duty handheld concrete scabblers
- Concrete floor scabblers, which are commonly called walk-behind concrete scabblers
- Low-vibration hand-held and floor models
- Pole scabblers for small and hard-to-reach areas
PRODUCT FILTER
Search :
Filter by tool type
Subcategories
Filter by Hand tool type
- Production Rate: 100 sq. ft./hr.
- Blows per Minute: 7200
- Vibration Levels: 8.7 m/s2
- Motor Power: 15.9 CFM (90 PSI)
- Production Rate: 50 sq. ft./hr.
- Blows per Minute: 2400
- Vibration Levels: 7 m/s2
- Motor Power: 6.5 CFM (90 PSI)
- Production Rate: Up to 100 sq. ft./hr.
- Blows per Minute: Up to 8400
- Vibration Levels: Up to 41.6 m/s2
- Motor Power: Up to 16 CFM (90 PSI)
- Cutting Width: 11"
- Production Rate: 430 sq. ft./hr.
- Blows per Minute: 6500
- Vibration Levels: 16.5 m/s2
- Motor Power: 80 CFM (90 PSI)
- Cutting Width: 10"
- Production Rate: 325 sq. ft./hr.
- Blows per Minute: 24,200
- Vibration Levels: 4.69 m/s2
- Motor Power: 55 CFM (90 PSI)
- Production Rate: 130 sq. ft./hr.
- Blows per Minute: Up to 1300
- Vibration Levels: Up to 35 m/s2
- Motor Power: 25 CFM (90 PSI)
- Optional Vibro-Lo™ / Low Vibration Available
- Leveling concrete and block joints
- Texturing, roughing and reducing concrete
- Preparing for coatings and waterproofing compounds
- Leveling high spots
- Texturing and roughening for sealant and overlay preparation
- Breaking down hard coatings prior to blast cleaning
- Backfill small areas in tight, narrow spaces or up against walls, mains, piping, utility poles, signs, fence posts and more
- Ideal for water, electric, gas and utility companies
- Compact clay, soil and asphalt, as well as any finely crushed or powdered material
- Backfill small areas in tight, narrow spaces or up against walls, mains, piping, utility poles, signs, fence posts and more
- Ideal for water, electric, gas and utility companies
- Compact clay, soil and asphalt, as well as any finely crushed or powdered material
[contact-form-7 id=”154348″ html_class=”default-background” title=”REQUEST A QUOTE”]
